- 您现在的位置：买卖IC网 > Sheet目录841 > B82496C3129A (EPCOS Inc)INDUCTOR 1.2NH 1.8A 0603
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
7
10/12
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
B82498F3569M
INDUCTOR 5.6NH 900MA 0805 20%
B82559A0392A013
INDUCTOR POWER 3.9UH 12A SMD
B85321-A2405-A630
CAP FEEDTHRU 250VAC 63A 2UF
BA1/2AAPC
HOLDER BATTERY 1/2AA W/COVER
BA2032SM
HOLDER COIN CELL 2032 EJECT SMD
BA2032
HOLDER COIN CELL CR2032 EJECT
BA2AAPC
HOLDER 2 CELL AA W/PC PINS
BA3AAPC
HOLDER 3 AA CELL SPRINGLESS
相关代理商/技术参数
B82496C3129A000
制造商:EPCOS 功能描述:Ind Chip Laser Cut 1.2nH 0.3nH 100MHz 8Q-Factor Copper Plated Ceramic 1.8A 0603 T/R
B82496C3129Z
制造商:TDK Epcos 功能描述:SMT-INDUCTOR 0603 1,2 NH 0,2NH - Tape and Reel 制造商:TDK Epcos 功能描述:SMT-INDUCTOR 0603 1.2 NH 0.2NH
B82496C3129Z000
功能描述:固定电感器 SMT-INDUCTOR 0603 1.2NH 0.2NH
RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
B82496C3150G
制造商:TDK Epcos 功能描述:SMT-INDUCTOR 0603 15 NH 2% - Tape and Reel
B82496C3150G000
功能描述:固定电感器 SMT-INDUCTOR 0603 15NH 2%
RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
B82496C3150J
功能描述:固定电感器 15nH 420mA 5% 1.6x0.8mm SMD
RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
B82496C3151G
制造商:TDK Epcos 功能描述:SMT-INDUCTOR 0603 150 NH 2% - Tape and Reel
B82496C3151G000
功能描述:固定电感器 SMT-INDUCTOR 0603 150NH 2%
RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm